The jigsaw PM4-700E is used to perform straight and curved sawing of flat materials with permissible thickness:
Features of the electric jigsaw PM4-700E
- wood up to 110 mm;
- aluminium up to 20 mm;
- steel up to 10 mm.
The motor power of 700 W is enough for continuous and systematic work. The reduction unit of the pendulum mechanism ensures the length of the working stroke of 26 mm and the frequency of reciprocating motion, in rated engine speed 3000 cycles / min.
Functional features of the PM4-700E
- Electronic regulation of the pendulum stroke frequency in combination with a mechanism for selecting 4 stages of reciprocating motion, allow you to choose the ideal ratio of maximum performance and quality indicators in the work;
- Compactness of the product, ergonomic design and good balancing of all rotating parts provide the most comfortable operation of the tool;
- The forced air cooling system not only removes heat from the motor windings effectively, but also blows sawdust out of the sawing area, which improves visual control of sawing precision and prolongs blade life;
- Cast aluminum housing of the gearbox and the front support bearing of the electric motor rotor, provides constant design clearances, good lubrication of all rubbing parts and heat dissipation, as well as product durability;
- The adjustment unit for vertical inclination of jigsaw PM4-700E allows making oblique saws at an angle from -45 to +45 degrees from perpendicular to the surface of the material, and the guide roller does not let the saw blade go sideways in all work modes;
- The switch lock in the pressed position makes it possible to perform precise sawing along complex paths without constantly keeping your finger on the trigger;
- Safety bracket and lowered transparent plastic cover in front of the saw localize the danger zone of the saw and increase the safety of the tool;
- Connecting to the blower pipe of the jigsaw Philent PM4-700E with a corrugated hose of a vacuum cleaner, significantly reduces the dustiness of the sawing area and reduces to a minimum the likelihood of injury from flying sawdust;
- LED backlight with its own galvanic element is provided for working in low visibility conditions;
- Electric jigsaw PM4-700E is equipped with an additional device for circular sawing of holes with a diameter of 80 to 460 mm, and sawing in a straight line of workpieces parallel to their edges;
- For particularly demanding saws the product can be up to complete with lateral support bumpers, installed in addition to the rear support roller.