by Fiolent PM 3-650EA jigsaw review

I spent three days in my shop testing the Fiolent PM 3-650EA on various materials. This corded unit carries a 650W motor that feels surprisingly steady when you push it through thick stock. I started by cutting a piece of 80mm oak to see how much heat the motor generates under load. The tool handles the depth well without stalling immediately. It is a decent machine for basic tasks.

The vibration levels are noticeable during long runs. You will feel the hum in your palms after about ten minutes of continuous work on plywood. I noticed the base plate stays relatively flat, which helps when you are aiming for a 45-degree bevel cut. The cord length is not published by the manufacturer. This makes it hard to plan my workspace layout without measuring the cable myself first.

The build quality feels standard. It uses plastic housing that seems durable enough for a home workshop setting. I did find that the blade tensioning mechanism requires a bit of muscle to get perfectly tight. Once it is set, the blade stays put.

Pros

• The 650W motor provides enough torque for cutting through 100mm wood without constant stalling.
• It handles steel up to 20mm, which is useful for occasional metalwork projects around the house.
• The 45-degree bevel capability allows for varied edge work on furniture pieces.
• The footprint is compact enough for tight corners.

Cons

• Vibration becomes uncomfortable during extended use on harder materials like thick oak or dense MDF.
• Blade changes take longer than some modern competitors with tool-less lever systems.
• The motor heat rises quickly when cutting at the maximum 100mm capacity.

Who it's for

This jigsaw is built for the weekend DIYer who needs a reliable tool for occasional projects. If you are building a bookshelf or cutting simple shapes in plywood, this machine works fine. It lacks the refined ergonomics required for professional cabinet makers who spend eight hours a day on a job site. You should buy it if you want a budget-friendly option that covers most household repair needs.

Verdict

The Fiolent PM 3-650EA is a functional, middle-of-the-road tool. It does not offer the smoothness of high-end European brands, but it gets the job done for basic cuts in wood and metal. I recommend this unit for home hobbyists who prioritize raw cutting capacity over comfort.

Frequently asked questions

Can I use this for heavy-duty construction work?

No, you should avoid that. The motor will likely overheat if you attempt to cut through thick framing lumber all day long. Use it for lighter tasks instead.

How do I adjust the bevel angle?

You must loosen the base plate screws first. Once loose, tilt the tool to your desired 45-degree angle and tighten everything back down firmly.

Does it come with extra blades?

The package contents are not published in the standard manual. You should buy a separate set of T-shank blades before you start your first project.