DeWALT DW341 jigsaw review

I have used dozens of jigsaws over two decades on job sites from Chicago to Seattle. Most people think a corded tool is a burden, but I prefer the constant power when cutting through thick oak. The DeWALT DW341 delivers 550W of consistent energy without the battery fade that kills your momentum halfway through a long rip cut. It feels solid in my hand. While the motor hums with a predictable rhythm, it does not vibrate enough to numb my fingers during an hour of repetitive work.

The tool is light. At exactly 2.0 kg, you can hold it steady for single-handed tensioning if you know what you are doing. I used this unit last Tuesday to cut several 65mm thick plywood panels for a custom cabinet base. The 20.0 mm stroke length provides enough bite to keep the blade moving through dense grain without stalling out. It handles curves well, though you must respect the weight distribution when making tight radii in thinner materials like MDF or pine.

It cuts fast. You will notice the speed stays high even as the blade encounters harder knots in the wood.

Pros

• The 550W motor provides steady torque for deep cuts up to 85mm in wood.
• It handles bevel cuts at a 45-degree angle without losing stability on the workpiece.
• The weight is well-balanced for long periods of use.
• You get consistent speed with 3100 strokes per minute.

Cons

• The cord length is not published in the standard manual, which can limit your movement around a large workshop.
• Dust collection is mediocre when cutting through heavy hardwoods.
• It lacks a variable speed dial for delicate tasks.

Who it's for

This tool suits the dedicated woodworker or the contractor who needs reliable power for heavy-duty ripping. If you spend your days cutting thick timber or structural plywood, the corded reliability will save you from dead batteries. It is not for the casual hobbyist making tiny, delicate lace patterns in thin craft wood. The lack of variable speed means you cannot slow down for extremely fine detail work on soft plastics. You need a tool that prioritizes raw cutting capacity over finesse.

Verdict

The DeWALT DW341 is a workhorse. It lacks the bells and whistles found on expensive German brands, but it gets the job done every single time I pull the trigger. The build quality feels like it can survive being tossed into a tool chest at the end of a hard day. Buy this if you want a dependable cutter for heavy materials.

Frequently asked questions

Can I use this to cut metal?

Yes, you can. It handles steel up to 20mm thick, but you must use the correct T-shank metal blade to avoid overheating.

Does it come with blades?

No. You will need to purchase your own set of blades depending on whether you are working with wood or metal.

Is the baseplate adjustable?

The tool allows for a 45-degree bevel cut. You can tilt the base to achieve these angles during your layout work.